At PC alike systems I use the following CPU's:
- Intel CPU's (80486..Pentium 4)
- VIA Nehemia
Until now I only use Atmel AVR Microcontrollers.
|
About Fiffismurf |
| I live in germany and I am 25 years old. My work is my hobby. In the spare time in the evening I work on hardware and software for PC's and microcontrollers. | |
| The processors / microcontrollers I use | |
|
At PC alike systems I use the following CPU's:
Until now I only use Atmel AVR Microcontrollers. |
|
| The Operating Systems I use | |
| At PC's I use the following OS'es: Windows 2000, QNX, DOS and SuSE Linux. | |
| The languages I use | |
| The most time I develop using the C/C++ programming language. At really time critical parts (e.g. µC Interrupts) I use pure assembly. | |
| About my projects | |
| As a true hacker, I have made lots of programs and small gadgets. Many of these were part of my learning curve, but some are worth mentioning here and showing to the world. Take a look at some projects: | |
| A control system for our electricity heating using an ATMega128 and 2 Easy-Radio modules (866 MHz) for easy changing the parameters from a PC inside our house |
| An ethernet board using an ATMega128 and a RTL8019AS based ISA-Bus network card |
| A dimmer for ohmic and inductive load using the ATTiny15L |
| A code door lock using an ATMega16 |
| A time switching clock for my PCB exposing lamp using the AT90S1200 |
| A lot of small boards (MMC, I²C, RTC, DS18S20,...) for the STK500 (A starter kit for the Atmel AVR's) |
| A RS232 <-> USB converter using the FT232AM from FTDI Chip |
| An ISA-Bus card with: digital I/O ports (2x8255), an LCD-Interface, and "CE-leds" (using an Atmel AT90S1200) which lights up if you access the card by software |
|
Page created 2004, Frame equipped with FrameStomper technology!
|